Structure Analyzer
Upload structural drawings | AI-powered layout extraction | 3D Frame Analysis
Material Selection
AI is analyzing your structural drawing...
This may take 10-20 seconds
Or define the grid layout manually:
Material Selection
X Grid Lines (Left to Right)
| Label | Position (m) |
|---|
Y Grid Lines (Bottom to Top)
| Label | Position (m) |
|---|
Column Types
| Type | Width (mm) | Depth (mm) |
|---|
Column Positions
| X Grid | Y Grid | Type |
|---|
Beam Sections
| Section | Area (mm2) | Depth (mm) |
|---|
Beam Positions
Each beam connects two adjacent column positions. Specify category as Primary or Secondary.
| From X | From Y | To X | To Y | Type | Category |
|---|
Shear Walls
Define walls between grid points. L/C/T walls use multiple segments sharing a corner.
| ID | Type | Thick (mm) | From X | From Y | To X | To Y | Stories |
|---|
Design Code
Building Configuration
Loading (kN/m²)
Self-weight of slab, beams and columns is auto-calculated from section properties
Seismic Parameters (IS 1893:2016)
Wind Load (IS 875 Part 3)
Section Properties
Cantilever Projections (m)
Analysis Options
Running 3D Frame Analysis...
Basic: ~5s | Modal: ~10s | FEM: 1-10 min | Progressive Collapse: varies
Run Modal Analysis to see mode properties.
Run FEM Analysis to see member forces.
Run FEM Analysis to see reactions.
Run FEM Analysis to see story drifts.